|
|
Design of prestressed box gireder bridge
Hofírek, Radovan ; Jurík, Michal (referee) ; Zich, Miloš (advisor)
This thesis deals with bridging of a lowland valley and the creek Dolanský in the section Jánovce – Jablonov on the Slovak motorway D1. Four variants of the bridge have been developed. Subsequently prestressed single box gilder with large overhangs that are supported by precast struts was selected as the most suitable variant. The construction of the bridge will take place in a formwork suspended on overhead launching scaffolding. The static assessment according to the Europan standard has been drawn up for this variant. The load of the bridge is projected according to the ČSN EN 1991-2 - Traffic loads on bridges and the dimensoin of concrete structures according to the ČSN EN 1992-2 - Concrete bridges - Design and detailing rules. The calculation of load is done using computer software SCIA Engineer 10.1 and Midas Civil.
|
|
|
D3 motorway bridge at km 33,588 in Slovakia
Lipovský, Václav ; Řeřucha, Kamil (referee) ; Koláček, Jan (advisor)
The diploma thesis deals with the design of a motorway bridge carrying the D3 motorway over a deep valley between Svrčinovec and Skalité. Three variants were developed for this work, from which the variant of a prestressed box girder bridge with sloping walls was selected for a detailed solution. The main superstructure was designed as a continuous structure with five spans of post-tensioned concrete. The superstructure is concreted in phases by means of an movable scaffolding system. The total length of the supporting structure is 255.50 m. The bridge is straight in plan. The analysis of the structure was carried out by means of several models that were created in Scia Engineer 21.1. The assessments of ultimate limit state and serviceability limit state were made according to valid standarts. The analysis of the structure was carried out in longitudinal and transverse directions. This thesis also includes a time dependent analysis (TDA) that takes the construciton phases into account. Finally, drawings and visualizations were produced.
|
|
|
Highway bridge across a railway
Mičánek, Ondřej ; Rušar, Jaromír (referee) ; Nečas, Radim (advisor)
The topic of this thesis is design and evaluation of the bridge structure. Three variants of bridging were created, among which the variant with prestressed girder deck and seven spans was chosen to detail processing. The bridge construction is built on sliding steel girder in several stages. Construction is evaluated considering the ultimate serviceability state and ultimate limit state. Emphasis is also on evaluation of construction stages. The calculation of load effects and analysis of building in stages was done in Scia Engineer 19.1 software. Design and evaluation were done according to currently valid European standards.
|
|
|
Static solution of bridge on the highway Jánovce-Jablonov
Darebníček, Pavel ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.
|
|
|
Bridge formed by cell box girder
Zifčák, Karel ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of the bridge construction across the deep valley on highway traffic. From three variants, which were compared to each other, was the most suitable further examined. The solved structure is made of post-tensioned concrete, and is formed with cell box girder with transverse overhangs, which are supported by prefabricated struts over the length of the bridge. The load was considered by the European Standard EN 1991-2 - Traffic loads on bridges and dimensioning according to EN 1992-2-Design of concrete structures - Concrete bridges - Design and detailing rules.
|
|
|
Design of a prestressed concrete bridge on the road I/38
Valent, Matej ; Nováček, Jan (referee) ; Zich, Miloš (advisor)
The diploma thesis deals with the design of an additionally prestressed and horizontally curved bridge structure on the 1st class road. The bridge is located on the newly emerging southeast bypass near the Czech town of Havlíčkův Brod. Three variants of the main supporting structure were proposed, with the choice being a chambered cross-section with inclined side walls. The total span of the bridge, with a length of 273,0m, was divided into 7 spans. The thesis also includes the design of the construction sequence. An assessment of the ultimate limit state and serviceability was carried out. Visualization and drawing documentation have been prepared for the thesis.
|
|
|
Highway bridge across a railway
Mičánek, Ondřej ; Rušar, Jaromír (referee) ; Nečas, Radim (advisor)
The topic of this thesis is design and evaluation of the bridge structure. Three variants of bridging were created, among which the variant with prestressed girder deck and seven spans was chosen to detail processing. The bridge construction is built on sliding steel girder in several stages. Construction is evaluated considering the ultimate serviceability state and ultimate limit state. Emphasis is also on evaluation of construction stages. The calculation of load effects and analysis of building in stages was done in Scia Engineer 19.1 software. Design and evaluation were done according to currently valid European standards.
|
|
|
Bridge formed by cell box girder
Zifčák, Karel ; Brtáň, Stanislav (referee) ; Nečas, Radim (advisor)
The subject of this thesis is the design and assessment of the bridge construction across the deep valley on highway traffic. From three variants, which were compared to each other, was the most suitable further examined. The solved structure is made of post-tensioned concrete, and is formed with cell box girder with transverse overhangs, which are supported by prefabricated struts over the length of the bridge. The load was considered by the European Standard EN 1991-2 - Traffic loads on bridges and dimensioning according to EN 1992-2-Design of concrete structures - Concrete bridges - Design and detailing rules.
|
|
|
Design of prestressed box gireder bridge
Hofírek, Radovan ; Jurík, Michal (referee) ; Zich, Miloš (advisor)
This thesis deals with bridging of a lowland valley and the creek Dolanský in the section Jánovce – Jablonov on the Slovak motorway D1. Four variants of the bridge have been developed. Subsequently prestressed single box gilder with large overhangs that are supported by precast struts was selected as the most suitable variant. The construction of the bridge will take place in a formwork suspended on overhead launching scaffolding. The static assessment according to the Europan standard has been drawn up for this variant. The load of the bridge is projected according to the ČSN EN 1991-2 - Traffic loads on bridges and the dimensoin of concrete structures according to the ČSN EN 1992-2 - Concrete bridges - Design and detailing rules. The calculation of load is done using computer software SCIA Engineer 10.1 and Midas Civil.
|
|
|
Static solution of bridge on the highway Jánovce-Jablonov
Darebníček, Pavel ; Šopík, Leonard (referee) ; Zich, Miloš (advisor)
The subject of Diploma thesis is the design of bridge on the highway Jánovce - Jablonov and his static solution. Selected variant is made from four span 34+44+44+34m and supporting structure consist of monolithic two beams of prestressed concrete. Height of cross section is over the whole lenght of the bridge constant. Each beams will be built on sliding formwork. The design of supporting structure is made according to limit states, including addressing timing analysis. Calculation of the effects of loading is made by software and reviews are calculated by hand according to Eurocode.
|
guest ::
